PTI PT-402 ACID ETCHING PRIMER MIL-C-8514C

Coating Removers

PTS-202? is a biodegradable peroxide based paint remover that is formulated to remove the most resilient coatings from metal and composite surfaces that conforms with military specification TT-R-2918A TYI.  This is a stable paint remover that will not corrode the metal.  PTS-202 works by breaking through the film of the paint and lifting the paint off in sheets instead of turning the paint to sludge.  This remover is easy and safe to use as well as clean up.

CAMA? (PTS-294) meets Military Specification: MIL-R-81294D TYI & TYII CL. 2A.  The Certified Aircraft, Marine & Automotive Paint Remover (CAMA?) is a non-flammable fast acting Urethane, Epoxy and Marine finish remover.  CAMA? is scientifically formulated to remove the most difficult surface coatings and stains.  Wash away action with water forms a foamy emulsion to get cracks, seems, moldings and crevices clean.  This product is viscous and formulated to cling to vertical surfaces.

XtremeStrip? is a fast acting remover of varnish paint, enamels, lacquer, shellac, glue and mastic.  XtremeStrip? is a very fluid – “water like” –  stripper that makes an excellent dip tank stripper.  It is formulated to be applied on flat surfaces – like floors.  XtremeStrip? will not raise the grain or discolor the finest woods.  After stripping the coating on the substrate, it is not necessary to neutralize the surface with water before coating the stripped surface.

Cleaners

PTC-2003C is the concentrate version of PTI’s Turbine engine gas path cleaner  MIL-PRF-85704C TYII & TYIII.  This product has been formulated as an aqueous cleaner, concentrate for “off-line” (crank wash) and “on-line” (fired wash) cleaning of turbine engines.  This cleaner also works well with prop engines.  THIS IS A COMPLETELY 0 VOC CLEANER.

PTC-2001 specifically formulated to be biodegradable, water dilutable and environmentally safe for use on aerospace equipment, aircraft equipment, aircraft exteriors, aerospace/aircraft ground equipment (AGE), AGE Engines and landing gear.  PTC-2001 is the only product needed to remove hydraulic fluid, jet exhaust and other difficult to remove dirt and grime from aircraft.  PTC-2001 is non-caustic, biodegradable, doesn’t contain any solvents or HAPS (Hazardous Air Pollutants).  PTC-2001 exceeds all U.S., Japanese and European Community VOC standards.    THIS IS A COMPLETELY 0 VOC CLEANER.

Surface Preparation

PT-402 Acid Etching Primer, when properly reduced with PT-1045 Reducer, meets and exceeds MIL-C-8514C. PT-402 is a polyvinyl butyral zinc chromate formulation that may be used to prime all plain or plated metallic surfaces.  Priming surfaces with PT-402 Acid Etching Primer prior to priming with epoxy primer MIL-PRF-23377 or by itself will ensure maximum adhesion and protection of all bake or air-dry finish coats (including lacquer finish coats).  The finely ground emulsions of zinc chromate pigments, resins and phosphoric acid hardeners are virtually non-settling.  Once applied, the Acid Etching Primer requires no sanding and has a pot life of 8 hours.  Extreme humidity can affect the bonding of the coating.