Alseal 143P

Alseal 143P is a high temperature water-based phenolic coating composition. This coating provides a very
hard, abrasion resistant, corrosion resistant, and chemical resistant barrier film at constant temperatures up to
400°F with intermittent peak temperatures of 600°F complemented by a near-zero VOC.
Color
Black. Custom colors available upon request.
Packaging
One gallon containers are standard.
Surface Preparation
New metal surfaces should be cleaned of oil, grease and dirt. The surface should then be prepared by blasting,
chemical treatment, or both depending on specific specifications and a proper Alseal basecoat applied.
Application
Alseal 143P should be applied using standard paint spray equipment. The coating may be thinned up to 10%
with water if necessary to help spray atomiziation. The air atomizing pressure should be approximately 30-40
PSI. A uniform wet coat should be applied to obtain the recommended dry film thickness. A mist or tack coat
applied first sometimes helps obtain desired results.