A single component non-toxic dry film lubricant consisting of a wax and a film forming polymer which holds the wax onto the surface, allowing for longer life than standard wax lubricants.
Apply to a clean and degreased surface. On
metal, lightly grit blasting using 150 to 280
mesh aluminum oxide will increase
adhesion.
Application
Spray application is recommended.
Standard paint spray equipment should be
used.
Thinning is usually not required. The air
atomizing pressure should be approximately
40 PSI and the fluid pressure approximately
15 PSI. A uniform wet coat should be
applied to obtain the recommended dry film
thickness. A mist or tack coat applied first
sometimes helps obtain desired results.